Grid
List
Adams 64
Utility pliers for bending laboratory wires.
Adams 65
Utility pliers for bending laboratory wires.
Adhesive Remover
Tip design allows access to remove adhesvie in practically any area of the mouth. Replaceable teflon pad withstands high heat sterilisation.
Arch Forming Pliers
The smooth inner surfaces of the convex and concave beaks allows forming and contouring of archwires.
Band Contouring Pliers
For easy contouring and adapting of bands and temporary crowns.
Band Remover - Long
The padded tip rests on the occlusal surface whilst the pointed tip catches the edge of the band for upward or downward removal. Longer tip.
High heat replaceable pads available in 4mm, 5mm, and 6mm diameter.
Band Remover - Short
The padded tip rests on the occlusal surface whilst the pointed tip catches the edge of the band for upward or downward removal.
High heat replaceable pads available in 4mm, 5mm, and 6mm diameter.
Band Slitter
This instrument cuts upper and lower bands. It features a diamond shaped groove to safely trap band during removal.
Bird Beak Plier
Facilitates bending round wire up to .030”. Features hardened tips.
Bracket Remover - Angled
Sharp tips wedge between the edge of the bracket base and the tooth surface lifting off the bracket with no discomfort to the patient.
Angled for easy access to difficult posterior areas.
Bracket Remover - Straight
Sharp tips wedge between the edge of the bracket base and the tooth surface lifting off the bracket with no discomfort to the patient. The removers grip firmly for easy horizontal or vertical use.
Ceramic Bracket Remover
Ideal to remove ceramic brackets with its sharp edges and 45 degree angles.
Cinch Back Plier
Cinches and bends NiTi archwires distal to the buccal tube. Slim beak allows precise working.
Distal End Cutter
Safety hold cutters with immunity steel tips that will not discolour or rust. Cuts wires from .012” to .021" x .025” hard wires.
Hard Wire Cutter
Specially designed for cutting hard wires.
Cuts .022” x .028” and .022” hard wire.
Hollow Chop Arch Forming Pliers
Smooth concave and convex surface of pliers makes for easy contouring or arch wires
Hook Crimping Plier
Designed to crimp stops, hooks and posts to the archwire. The slot fits over the base of the hook while holding it tight for crimping.
How Utility Plier
Features straight serrated tips for a firm grip. Tips are 3mm diameter.
Light Wire Plier
TOC-E0391 - Utility Pliers for working with round wire. Features cutter and hardened tips. Max .022” x .25” wire.
TOC-E0392 - With tapered beaks for forming precise bends and loops in round archwires up to .020”.
TOC-E0631 - Designed for working on round wires with two grooves at the tips to ensure a non slip grip. First groove is 1mm and the second is 2mm’s fron the tip...
Lingual Arch Forming Pliers
For creating double and triple back bends in lingual arch wires.
Mauns Heavy Duty Cutters
Cuts wires up to 1.0mm.
Nance Pliers
For precise forming of loops in four lengths (3,4,5 and 6mm). Rounded edges prevents wire damage.
Max 0.028” wire.
Omega Loop Forming Plier – Tweed Type
The concave beak is contoured for making uniform Omega loops easily.
The round beak has three sections of .045”, .060” and .075” diameter.
The round beak can be quickly replaced in the surgery.
Max. 022” x .025” wire.
Optical Pliers with TC tips
Finely finished round and concave beaks for forming helical closing loops and arch adjustments. Can be used for loop tip backs and gable ends. Allows firm grip without nicking wire.
Pin & Ligature Cutter
A standard pin cutter with tips that have an ideal length of 12mm. Cuts .012” to .016”.
Slim Bird Beak Pliers
Utility pliers popular for working on round and rectangular wires. Tips are hardened for making smooth loops.
Max. 022” x .025” wire.
Slim Weingart Plier
General utility plier with slimmer tips for easier access to difficult areas. Serrated tips hold archwires firmly in the mouth.
A variant with T.C. tips is also available.
Step Forming Plier
Make right or left, step up or step down bends in one simple action.
Can be used intra-orally so no need to remove the archwire.
The 3 sizes allow you to apply the precise amount of bend required.
Also able to intrude or extrude a tooth or teeth and change inclination or rotation.
Three Jaw Plier
For adjusting clasps, retainers and archwires. With perfectly aligned tips which are tapered for delicate bending.
Bends wire up to .030”
Three Jaw Plier (Rounded)
Precision aligned tips ensure consistent bends. Tapered and rounded for delicate bending.
Max 0.030 “ wire.
Tweed Arch Forming Plier
Designed for double back or triple back wire bending and can accommodate .030”, .036” square wires. Also ideal for torquing.
Tweed Loop Forming Pliers
Loop Forming Pliers with .040”, .075” and .10” for making helical and bull loops. Max. .022” x .025”
V-Bend Pliers
Special design to make 1mm V Bends with one squeeze to shorten archwires or make a postive stop. Excellent for placing stops in nickel titanium wires.
Max. .019” x .025” wire.
Weingart Plier
General utility plier with serrated tips to hold archwires firmly in the mouth. Angled for ease of working and good access.
A variant with T.C. tips is also available.
Young Loop Bending Pliers
Universal plier for that can be used for many bending procedures. It provides a uniform dimension to loops.
Max. .028”